According to the climate data of the last 5 years of your region by BHK Greenhouse engineers, the heating system in your greenhouse; snow, wind and humidity in your region by taking into account the current heating source (natural gas, solid fuel, fuel oil, thermal) is calculated by making the most efficient way to make calculations. BHK Greenhouse completes the material production and installation stage with great precision together with the technical teams of the greenhouse heating systems that it is committed to.
Our company, which attaches importance to R & D in the sector and supports R & D with financial support, manufactures some of the materials used in greenhouse heating. It is the only company that has a “Useful Model Application” in its heating console system developed with its innovative approach.
Climate and Water Values
Heating data for your area
Lowest outdoor temperature: -15
Greenhouse Optimal temperature: 18
Delta T: -33
Heating Source: Natural Gas
Heating System Supply Water: network
Boiler cal: 1,500,000 cal
Heating System Water Values
Softness: 0.1
pH: 8
Iron Ratio: 0,5
Copper Ratio: 0,1
Sodium Hydroxide: 0.5
Oxygen: 0.1
Boiler and Burner
Boiler Type Hot Water Boiler
Capacity 9000000: Kcal / h
Boiler Quantity: 1
Chimney Diameter and Height: Shall be suitable for boiler capacity
Boiler Outlet Pipe Diameter: Will be suitable for boiler capacity and heating account
Expansion Tank Capacity: Will be suitable for boiler capacity and heating account
Fuel Type: Coal
Emergency Fuel Type: Coal
Capacity: 0
Burner Range: Proportional
Collectors and Pipes
Hot water passes into the greenhouse through collectors from the heat center.
Intermediate Line and Heat Walls: 51 * 2,25 mm TSE 10217
Main Line: 60 * 2,5 mm TSE 10217
Main Line: 76 * 2,5 mm TSE 10217
Main Line: 89 * 2,5 mm TSE 10217
Main Line: 114 * 3 mm TSE 10217
Main Line: 139 * 3 mm TSE 10217
Main Line: 168 * 3 mm TSE 10217
Main Line: 219 * 5 mm TSE 10217
Major Heating System Materials
* Pump on
* Air Shooters
* Three Way valves
* Butterfly Vanala
* Spot Legs
* Hanger Systems
* High Pressure Rubber Hoses
* Measuring Instruments
* Connectors
* Other Small Parts
Heating Types
In the greenhouse, our alternative heating types are presented below.
* Rail Heating
* Plant Heating
* Plant Root Heating
* Heat Wall
* Gutter Heating
* Top Heating
* Table Heating
* Underground Heating
The following types of heating will be applied in your greenhouse:
Rail Heating
Rail Heating is a heating system that allows the movement of rail vehicles on the heating pipe as well as providing the benefit of plant heating.
Galvanized Spot Leg Features
Pipe Type: 51,2,25 mm
Spot Leg Thickness: 1,5 mm
Spot Foot Spacing: 2.100 mm
Spot Leg Height: 125 mm
Plant Heating
It is a heating system which is applied 0.50 – 1.20 cm above the plant root level in order to increase plant yield.
Plant Root Heating
It is a heating system applied under the plant root in soilless greenhouses in order to increase plant yield.
Heat Wall
It is applied to the greenhouse side facades to reduce heat transfer, and to the sides of the tunnel to ensure uniform heat distribution.
Gutter Heating
It is a heating system that ensures the evacuation of the gutters by melting the snow accumulated in the gutters and greenhouse roofs and preventing freezing in the gutters in areas with risk of snow and frost.
Upper heating
It is a heating system applied at the gutter level in order to increase plant yield.
Seedling Stand Heating
It is the heating system applied under the seedling stand.
Underground Heating
It is the heating system applied under the soil in the grounded greenhouses in order to increase plant productivity.
